Turbo-Burr®
|
 |
- Easily brought to the work site
- For use as both a hand and bench tool
- Breaks sharp edges on parts at mill, saw or shear
Perfect for deburring and edge finishing of:
- Plastics
- Ferrous and non-ferrous metals
- Stainless steel
- Aluminum
- Laminates
- Printed circuit boards
- Light weight only 3-1/2 pounds
- For use as both a hand-held tool or bench mounted
- One pass deburring and safety edging of plastics or sheet metal
- Light chamfering up to .075" depth of cut
- High speed (55,000 rpm) produces clean, machined edges
- Easily adjusted depth of cut
- Handle features handy storage for cutters and wrenches
|
Specifications
Rotation Speed: 55,000 rpm (no load speed)
Air Consumption: 5 to 11 cfm - lubrication not needed
Air Pressure: 60 to 120 psi
Air Hose: 1/4"
Minimum Material Thickness: .015"
Collet: 1/4" - compression type
Burr Type: 1/4" dia. x 2" length overall - solid carbide
Depth of Bevel: 0 to .075 inches at 45°
Feed Speeds: up to 2 inches per second
Weight: 3.5 pounds (1.6kg) |
Model S Turbo-Burr
With closed-bottom “V” block
Suitable for most applications.
(select cutter from list below) |
Model R Turbo-Burr
With a small gap at the bottom of the V” block Suitable for materials 0.135 inch and heavier, where large burrs are present. (select cutter from list below) |
Model SA-INF Five Flute Rapid removal and good finish for plastics and hard rubber. |
| Applications Reference Chart |
|
Burr Pattern |
SA-1
Spiral Cut
Improved finishes |
SA-1DC
Double Cut
Rapid removal,
reduced finish |
SA-1DIA
Diamond Cut
Agressive removal,
reduced finish |
SA-1NF
Five Flute
Rapid removal,
good finish |
| Aluminum |
X |
X |
X |
X |
| Brass, Bronze, Copper |
X |
X |
X |
X |
| Carbon |
X |
X |
X |
X |
Circuit Board
Connnectors |
X |
X |
X |
X |
| Fiberglass |
X |
X |
X |
X |
| Cast Iron |
X |
X |
X |
X |
| Malleable Iron |
X |
X |
X |
X |
| Magnesium Alloys |
X |
X |
X |
X |
| Masonite |
X |
X |
X |
X |
| Plastics |
X |
X |
X |
X |
| Hard Rubber |
X |
X |
X |
X |
| Steel - Carbon |
X |
X |
X |
X |
| Steel Alloy 40-55 Rc |
X |
X |
X |
X |
| Steel Alloy 55-60 Rc |
X |
X |
X |
X |
| Steel - Nickle Chrome |
X |
X |
X |
X |
| Stainless Steel |
X |
X |
X |
X |
| Steel - Weldments |
X |
X |
X |
X |
| Titanium |
X |
X |
X |
X |
| Zinc Alloy |
X |
X |
X |
X |
| Pricing and Purchase on Abbeon.com. |
|
|
|
