Standard Ion Air Knife
A sheet of ionized air is an effective way to eliminate static and clean parts or materials!
Our Standard Ion Air Knife removes static electricity from plastics, webs, sheet stock and other surfaces where tearing, jamming or hazardous shocks are a problem.
The air knife carries ions from an ionizing bar to the charged surface— up to 20 feet away. The air knife (30:1 air amplification) provides fast static decay and strong blowoff force for cleaning and has no moving parts. This force can be adjusted from a “blast” to a “breeze” and is electrically powered and shockless.
Compressed air inlets are provided on each end of the air knife. For long spans, multiple Standard Ion Air Knives can be connected end-to-end. Special length ionizing bars up to 120" are available for multiple air knife applications. Meets OSHA dead-ended pressure and noise requirements.
Applications
- Molding machinery
- Sheeters and trimmers
- Cleaning parts
- Pre-paint dust removal
- Shrink wrappers
- Package cleaning
- Bag opening/fill operations
Advantages
- Reduced air consumption
- 30:1 air amplification
- Low noise level
- Effective up to 20 feet (6.1m)
- Shockless, non-radioactive
- Compact, rugged, easy to install
- Unlimited system lengths
- Low maintenance
- Variable force and flow
The Model 7218 18" Standard Ion Air Knife System showers parts with static eliminating ions
| Performance | |||||
| Pressure Supply |
Air Consumption* |
Sound Level |
Dissipates 5kV** | ||
| PSIG | BAR | SCFM | SLPM | dBA | SECONDS |
| 5 | 0.3 | 2.9 | 82 | 66 | 0.55 |
| 10 | 0.7 | 4.3 | 122 | 68 | 0.40 |
| 20 | 1.4 | 16 | 453 | 69 | 0.25 |
| 40 | 2.8 | 24 | 679 | 78 | 0.20 |
| 60 | 4.1 | 32 | 906 | 84 | 0.18 |
| 80 | 5.5 | 41 | 1160 | 87 | 0.18 |
| 100 | 6.9 | 49 | 1387 | 90 | 0.18 |
| * per foot (30cm) of length ** 6" (15cm) from target | |||||
| Standard Ion Air Knife Only
Consists of the Standard Air Knife and Ionizing Bar assembly. | ||
| Model | Description | |
| 7103 | 3" (76 mm) Ion Air Knife | |
| 7106 | 6" (152 mm) Ion Air Knife | |
| 7112 | 12" (305 mm) Ion Air Knife | |
| 7118 | 18" (457 mm) Ion Air Knife | |
| 7124 | 24" (610 mm) Ion Air Knife | |
| 7130 | 30" (762 mm) Ion Air Knife | |
| 7136 | 36" (914 mm) Ion Air Knife | |
| 7142 | 42" (1067 mm) Ion Air Knife | |
| 7148 | 48" (1219 mm) Ion Air Knife | |
| Pricing and Purchase at Abbeon.com | ||
| Specifications
The Standard Ion Air Knife is available in seven standard lengths: 3", 6", 12", 18", 24", 30" and 36". Shielded power cable with ground and assembled bayonet connector are included. Model 7901 Power Supply is required for bar operation. The power supply is equipped with a 6' power cord, lighted power switch and two high voltage outlets. Power supplies are UL Listed to U.S. and Canadian safety standards. Certifications: Ionizing bars are UL Component Recognized, CSA Certified. Compressed Air: 1/4" NPT inlets are provided on each end. Electrical: For use with 5 kVrms, 5 milliamperes (max.) power supply, Model 7901 (115V). Electrical Hazard: Ionizing bars are shockless (less than 40 microamperes short circuited). Do not use near flammable materials or gases. Materials of Construction: Standard Air Knife— Aluminum Ionizing Bar Channel— Aluminum Plastic Parts— UL rated 94 HB Emitters— Stainless Steel Maximum Ambient Temperature: 165°F (74°C) Shims: Thicker shims can be installed easily if additional hard hitting velocity is required. |
| Standard Ion Air Knife System
Includes a Standard Ion Air Knife and Model 7901 Power Supply | ||
| Model | Description | |
| 7203 | 3" (76 mm) Ion Air Knife System | |
| 7206 | 6" (152 mm) Ion Air Knife System | |
| 7212 | 12" (305 mm) Ion Air Knife System | |
| 7218 | 18" (457 mm) Ion Air Knife System | |
| 7224 | 24" (610 mm) Ion Air Knife System | |
| 7230 | 30" (762 mm) Ion Air Knife System | |
| 7236 | 36" (914 mm) Ion Air Knife System | |
| 7242 | 42" (1067 mm) Ion Air Knife System | |
| 7248 | 48" (1219 mm) Ion Air Knife System | |
| Pricing and Purchase at Abbeon.com | ||
| Standard Ion Air Knife Kits
Includes a Standard Ion Air Knife, Model 7901 Power Supply, shim set, filter separator and pressure regulator. | ||
| Model | Description | |
| 7403 | 3" (76 mm) Ion Air Knife Kit | |
| 7406 | 6" (152 mm) Ion Air Knife Kit | |
| 7412 | 12" (305 mm) Ion Air Knife Kit | |
| 7418 | 18" (457 mm) Ion Air Knife Kit | |
| 7424 | 24" (610 mm) Ion Air Knife Kit | |
| 7430 | 30" (762 mm) Ion Air Knife Kit | |
| 7436 | 36" (914 mm) Ion Air Knife Kit | |
| 7442 | 42" (1067 mm) Ion Air Knife Kit | |
| 7448 | 48" (1219 mm) Ion Air Knife Kit | |
| Pricing and Purchase at Abbeon.com | ||
