BLADES for ZETZ-9 and
ZETZ-24 THERMOCUTTERS
Specs, Pricing and Purchase on Abbeon.com>
Choose the blade to suit the purpose. These blades are designed so that heat is concentrated along the cutting edge in order to achieve the optimum cutting temperature. Prior to insertion in the material to be cut, the temperature of the blades will be between 100°C and 800°C, depending on the type of blade and the thermocutter used. The temperature to the blade cools down as it enters the material. The temperature depends on the thermal pro-perties and heat conductivity of the material being cut and determines the cutting speed. The cutting edge is evenly heated because of the design of the blade's cutting flanges.
Examples of uses

Cutting and de-burring of:

  • Natural and synthetic rubber
  • Rubber sheets 30-80 Shore
  • Rubber with textile
  • PVC boards, foils and sheets
  • Cutting off and heat sealing fabric piles, industrial tubings, profile gaskets.
  • Car trim and upholstery, cutouts in instrument panels.
  • Roof and wall insulation boards up to 125 mm thickness of foam PE, PS, PU. No gap, no cold bridge.
  • Cutting out silicone gaskets for construction joints.
  • Floor and wall claddings, including bituminous materials.
  • Stress-free cutting of profile gaskets of PVC and Neoprene rubber for window and door frames.
  • Clean cuts for subsequent welding or gluing.
  • Electrical installations like conduit and trunking channels. Insulating cables and leads.


  • Suitable for thermoplastics with higher melting points such as rubber, synthetic rubber, synthetic resins
  • Cutting rubber up to 90 Shore combustible, oil resistant rubber.
  • Cutting out rubber linings on containers, mixers, vibration and conveyor chutes and troughs.
  • Angled cuts at joints on conveyor belts, camelbacks, rubber anti-abrasion coatings.
  • Cutting and peeling rubber sectioning belts and flexible PVC (supported or unsupported).
  • Blades are designed for rapid heating to maximum temperature
  • The entire cutting edge must be used in the material to obtain full benefit of the heat and to maximize cutting efficiency. Blades are available in 5 cutting lengths and should be chosen according to thickness of material.
ZETZ-24>>
Specs, Pricing and Purchase on Abbeon.com
Questions or Orders —
Call  800/922-0977   8am – 4pm Pacific Time