Opus 208 Datalogger
  • 8-Channel Datalogger
  • Connect any sensor with industrial output signal
  • High accuracy
  • CAN-Bus Networking with up to 30 units
  • Expandable with Opus 200/300 modules

The Opus 208 datalogger has eight numerical input channels and four open collector outputs which can be programmed independent of the channel. The universal input structure allows the connection of nearly all common sensors. Configuration of the inputs is accomplished through the software.

Every unit can be the interface for data transmission to the PC. In a network, more than one unit can be the interface for data transmission but no more than 30 units total. The data transmission is via an RS 232 cable with 19,200 baud.

The sensor inputs are capable of measuring resistance, current, voltage and digital pulses/frequency. The four protected open-collector outputs can be programmed channel independent as active outputs.

All measuring results are displayed by rotating through the two-line LCD display.

The unit comes with SmartControl software which can be upgraded for additional options. Units are mountable on a 35 mm DIN rail.

Specifications
Dimensions:
Measuring Interval:
Case:
Alarm Output
Display:
Weight:
Interface
Power Supply:
Storage Interval:

Storage Possibilities:
Power Consumption:
Operating Temperature:
Operating Rel. Humidity:
9½ x 31/6 x 11/3"
1, 10, 60 sec (adjustable per channel); 1, 10, 30, 60 sec
Steel housing, lacquered
Open collector 50 mA/12V for input channels 1 to 6
2 lines, 16 characters readable down to -20°C
28 oz
Serial, RS232
9 - 15 VDC, nominal, 12 V battery
1, 10, 30, 60 sec, 1 to 1,440 operating minutes
       (adjustable per channel)
ave, min, max, any combination possible
< 60 mA
-30 to 60°C
0 to 95% (non-condensing)
#816200 Opus 208    8-Channel Datalogger      FOB CA
8162STI Connectors
8160TFF10 Cable (10 meter)
8160TFF50 Cable (50 meter)
Pricing and Purchase of Opus 208 8-Channel Datalogger available on Abbeon.com.
Questions or Orders—
Call 800/922-0977   8am – 4pm Pacific Time